I have my MFJ 949E MANUAL TUNER ATU ATU TUNER Surplus to my requirements
In very good condition comes from a smoke free home - £80
Can be inspected & Collected in Milton Keynes 07966 200996
Specification
Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz. Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun. Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner. 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver. Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges.
Key Features/Specifications:
Type: MFJ 949E manual tuner
Frequency: 1.8-30MHz
Power: 300 watts
Meter cross needle
Size: 260 x 190 x 83mm
Weight: 1.80kg
VSWR & power meter 30/300W
Inductor selector
Sockets SO239
Terminals for wire & balanced lines
Antenna by pass switch
Dummy load socket
Tuning & reactance controls
3 way antenna selector